что гуглить? тазовые ускорения в повороте?))))
на таз не нашел, зато нашел сравнение ф1 и феррари энцо )))
Lateral force

As mentioned above, the car can accelerate to 300 km/h (190 mph) very quickly, however the top speeds are not much higher than 330 km/h (210 mph) at most circuits, being highest at Monza 360 km/h (224 mph), Indianapolis (about 335 km/h (208 mph)) and Gilles Villeneuve (about 325 km/h (202 mph)). This is because the top speeds are sacrificed for the turning speeds; however, this paradox was cleverly circumvented during the 2010 F1 season as many teams were using the now banned F-duct system. An F1 car is designed principally for high-speed cornering, thus the aerodynamic elements can produce as much as three times the car's weight in downforce, at the expense of drag. In fact, at a speed of just 130 km/h (81 mph), the downforce equals the weight of the car. As the speed of the car rises, the downforce increases. The turning force at low speeds (below 70 to about 100 km/h) mostly comes from the so-called 'mechanical grip' of the tyres themselves. At such low speeds the car can turn at 2.0 g. At 210 km/h (130 mph) already the lateral force is 3.0g, as evidenced by the famous esses (turns 3 and 4) at the Suzuka circuit. Higher-speed corners such as Blanchimont (Circuit de Spa-Francorchamps) and Copse (Silverstone Circuit) are taken at above 5.0g, and 6.0g has been recorded at Suzuka's 130-R corner.[16] This contrasts with 1g for the Enzo Ferrari, one of the best racing sports cars.